Analytik Jena multi EA 4000 User Manual

Basic Information
8 Edition 01/2016 multi EA 4000
Power station
An important application area for the multi EA 4000 is both the carbon detection in carbon or
ash residue and the detection of residual carbon in the ash of incineration plants. The chlo-
rine detection in surrogate fuels is also of significance here.
Material testing
The multi EA 4000 enables a rapid sulfur and/or carbon detection in construction materials,
such as cement or plaster, in ceramic materials or glass samples.
Research and teaching
Due to the many specific configuration options the multi EA 4000 is suitable for use in teach-
ing and research.
The analyzer multi EA 4000 must only be used for the methods for the detection of total car-
bon and/or total sulfur content or the detection of the total chlorine content in solid, paste-like
or liquid samples described in this user manual. Any other use is not as intended! Only the
operator is liable for any damages that result from this.
In particular it is prohibited to use the analyzer to analyze flammable liquids or substances
that could farm explosive mixtures. No concentrated acids may be analyzed with the analyz-
er.
The device must only be operated with the carrier gases oxygen 2.5 and argon 4.5 or better.
The operational safety of the analyzer EA 4000 is only ensured during proper use according
to the information in this user manual. The intended use also includes the adherence to the
installation conditions prescribed by Analytik Jena AG which are available from the customer
service address stated on the title page.
1.3 Warranty and liability
The warranty duration and liability comply with the legal requirements and the provisions in
the general terms and conditions of Analytik Jena AG.
Deviations from the intended use described in this user manual result in limitations of war-
ranty and liability during a damage event. Damage to wearing parts is not included in the
warranty.
Warranty and liability claims are excluded for personal injury and property damage due to
one or several of the following causes:
 use of the analyzer multi EA 4000 other than intended
 improper commissioning, operation and service of the analyzer
 modifications of the equipment without prior consultation with Analytik Jena AG
 unauthorized intervention in the equipment
 operation of the device with faulty safety equipment or improperly fitted safety and
protection equipment
 inadequate monitoring of the equipment components subject to wear
 use of other than original spare parts, wearing parts or consumables
 improper repairs
 faults due to the non-observance of this user manual

Analytik Jena multi EA 4000 Specifications

General

Brand	Analytik Jena
Model	multi EA 4000
Category	Measuring Instruments
Language	English