Analytik Jena multi EA 4000 - Installing the Multi EA 4000 C;S Cl

Transport and storage
multi EA 4000 Version 01.16 127
10.3.3 Installing the multi EA 4000 C/S Cl
Connections
For the combination of multi EA 4000 – and C/S module - Cl module the following connec-
tions must have been made:
multi EA 4000 connections
Target
"valve"

C/S module "valve"
"analyte"

C/S module "analyte"
"O
2
"

Oxygen gas connection
Mains cable

Mains connection
"COM"

C/S module "COM"
"pump"

C/S module "pump"
"Ar"

Gas connection for argon (only required for Cl
measurement and pyrolysis)
"out"

open output
additional C/S module con-
nections
Target
"PC"

USB connection for PC connection
"Cl-Coul"

Cl module / "Cl-Coul"
"scale"

external scales (optional)
"sampler"

connection of the sampler FPG 48
socket for mains connector

Mains connection
additional connections of the
Cl module
Target
"Cl"

C/S module "Cl"
socket for mains connector

Mains connection