Analytik Jena multi EA 4000 User Manual

Safety instructions
multi EA 4000 Version 01.16 13
 All safety equipment and interlocks must be well accessible and regularly checked
for proper operation.
3.5 Requirements for the operating personnel
The analyzer multi EA 4000 must only be operated by qualified specialist personnel instruct-
ed in the use of the analyzer. The instruction must also include conveying the content of this
user manual and the user manuals of other system components or add-on equipment.
The analyzer may pose dangers if it is not used by trained personnel, improperly or other
than intended.
Therefore, every person tasked with the operation of the analyzer must have read and un-
derstood this user manual and the user manuals of any additional equipment before carrying
out the respective tasks. This also applies if the respective person has already worked with
or been trained on this kind of analyzer.
It is recommended that the operator have the operating personnel confirm the knowledge of
the content of the user manual in writing. The ultimate responsibility for the accident-free
operation of the analyzer rests with the operator or the specialist personnel authorized by
him.
In addition to the safety at work instructions in this user manual the generally applicable
safety and accident prevention regulations of the respective country of operation must be
observed and adhered to. The operator must ascertain the latest version of these regula-
tions.
The user manual must be accessible to the operating and service personnel at any time!
The following has to be observed:
 The analyzer must only be commissioned, operated and serviced by trained person-
nel instructed in technical safety.
 The operation or servicing of the analyzer by minors or individuals under the influ-
ence of alcohol, drugs or medication is not permitted.
 It must be ensured that only authorized personnel works at the analyzer.
 The operating personnel must be familiar with the dangers arising from measuring
liquids. The appropriate protective equipment must be used.
 Prior to pauses or at the end of the work appropriate skin cleaning and protection
measures must be carried out.
 Eating, drinking, smoking or handling open flames in the operating room of the ana-
lyzer is prohibited!
3.6 Safety instructions, transport and installation
The analyzer is always installed by the customer service department of Analytik Jena AG or
its authorized and trained specialist personnel. Independent assembly and installation are
not permitted. Incorrect installation can create serious hazards.
The following has to be observed:
 Insufficiently secured components pose a risk of injury! During transport the compo-
nents of the equipment must be secured in accordance with the instructions in the
user manual.

Analytik Jena multi EA 4000 Specifications

General

Brand	Analytik Jena
Model	multi EA 4000
Category	Measuring Instruments
Language	English