7-13
∗SRE? Service Request Enable Query
(Returns the current value of the service request enable register)
■ Format
∗SRE?
■ Application example
Issuing an ∗SRE? command after executing an ∗SRE16 returns 16.
■ Explanation
The value NR1 of the service request enable register is returned.
■ Response message NR1
Since NR1 = bit 6 (RQS bit) cannot be set, NR1 = 0 to 63 or 128 to 191.
∗SRE
Query
To Next Page
Loading...
