Anritsu MS9710C - Page 154

9-15
AP WDM, TCL, u [Application WDM Threshold Cue Level]
■ Function
Sets the cut level for calculating the signal wavelength by using the Threshold
analysis in the WDM application.
Header Program Query Response
AP AP WDM, TCL, u AP ? WDM, TCL WDM, TCL, u
■ Value of u
Sets the cut level for calculating the signal wavelength by using the Threshold
analysis in the WDM application.
0.1 ≤ u ≤ 50.0
0.1 Step
■ Initial setting value
u is a backed up value.
■ Default
u = 3.0 dB
AP OFF [Application Off]
■ Function
Terminates application measurement.
Header Program Query Response
AP AP OFF AP ? OFF
9.4 AP [Application]