Anritsu MS9710C - Page 248

11-31
11.4 Description of Measuring Instrument Driver Functions
MS9710A ZoneMarker ;Set / Erase
MS9710
ZoneMkr
This driver sets or erases zone markers.
When a Center or Span parameter is not input, zone markers are erased.
Input parameters:
Center (nm) (Erase) .................... Sets the center.
Span (nm) (Erase) ....................... Sets a span.
MS9710A ZoneMarker ;Zone to Span
MS9710
ZoneMkr
Span
This driver sets the area between zone markers as a span.
MS9710A ZoneMarker ;Zoom Out/In
MS9710
ZoneMkr
Zoom
This driver zooms in or out zone markers.
Input parameter:
Zoom Out/In (Out: F) ................. Sets “Zoom In” or “Zoom Out.”