7-15
7.5 Outline of Displayed Screen
[5] Making Time (Data creation time display field)
Displays the time of data registration if data for the serial number inputted in item [3]
are available, or displays the current time if no relevant data are available.
[6] Input Data (Data input field) Used to make changes to data in “Cal. Data” of item [2]. Changes can be made by
direct key input.
[7] “OK” button Selection of this item displays a message prompting the confirmation of whether the
data is to be saved if changes to information were made, and resumes the measurement.
If no items have been set, an error message is displayed. See paragraph 7.6.5 “Input-
ting Programmable Attenuator Calibration Data” for more information.
To Next Page
Loading...
