MENU > Recording 103
15.3 Project settings
15.3.1 Project rate
MENU > Recording > Project settings > Project rate
Offers the following options for setting a Timecode time base and playback frame rate:
Project rate
23.976p
24p
25p
29.97p
30p
48p
50p
59.94p
60p
50i
59.94i
60i
Scan format
Progressive
Progressive
Progressive
Progressive
Progressive
Progressive
Progressive
Progressive
Progressive
Interlaced
Interlaced
Interlaced
Sensor real-time recording
23.976 fps
24 fps
25 fps
29.97 fps
30 fps
48 fps
50 fps
59.94 fps
60 fps
50 fps
59.94 fps
60 fps
NOTICE
Changing the project rate will match the sensor fps setting to the project rate,
unless the user switch is set to FPS. A popup will inform about this. SDI fps should
also be checked when setting project rate.
NOTICE
Setting the camera to an interlaced project rate requires the sensor to run at an
equal frequency to capture real-time images. Therefore, as an example, project rate
50i requires the sensor to be set to 50 fps.
To check SDI settings, press SDI (1).
To Next Page
Loading...
