1. Via the user button menu (see "Presetting user (and VF) buttons"), you can assign
a function to both VF1 and VF2 buttons (1).
10.2.4 PLAY button
1. Press PLAY (1) for one second to see the last clip of the active CFast 2.0 card.
°
Playback is active on monitor, on EVF and on SDI out.
2. You may toggle between play and pause by briefly pressing PLAY (1) again.
3. To exit playback: Press PLAY (1) for one second.
4. Extended playback control is available via the on-screen navigation (see below).
To Next Page
Loading...
