MENU > System 135
18.7 Wireless remote system
The wireless remote system menu screen controls the WRS white radio settings.
The WRS system connects the camera to electronic accessories like the WCU-4 for
wireless camera and lens remote control.
Power: Switches white radio module power on or off.
Channel: Sets the channel of the WRS module.
Status: Shows the status of the WRS module.
Connected devices: Shows the number of WRS devices connected to the camera.
Calibrate all: Triggers a calibration of all connected lens motors. Note: Do not trigger a
calibration unless all connected motors are attached to the lens.
Focus/Iris/Zoom motor torque: Sets the torque strength of the focus/iris/zoom axis
motor.
Focus/Iris/Zoom motor direction: Sets the motor direction of the focus/iris/zoom axis
motor. The direction may have to be changed depending on the mounting position of
the motor (left/right side or top/bottom).
To Next Page
Loading...
