Connectors 29
7.3.2 Changing a CFast 2.0 card
NOTICE
ALEXA Mini does not accept ALEXA-formatted CFAST 2.0 cards, and vice versa.
Before using a CFAST 2.0 card with ALEXA Mini, you must erase it in-camera to
create the required file system
Avoid damage to the contacts of both camera and card. Always insert cards as
described in this document.
Never change memory cards when recording - this may damage the recorded clip.
Card capacity is limited to 95% of the physical capacity to avoid card reliability
issues.
1. Open the lid (1).
2. Align the card's positive edge (3) facing the camera rear.
3. With the contact pins first, gently insert the card, until it audibly locks (2).
4. Gently close the lid (1). Never force it closed on an unlocked card.
To Next Page
Loading...
