Room Devices
Telligence
40PM000224A / 10 August 2022 / Ver. H
Room Devices
Figure 48: Typical Room Devices
Telligence room devices connect patient rooms and beds to the Telligence system. This
chapter describes this group of devices and provides instructions for using them.
Basic Functions
Room modules, including patient stations and TelliConnect stations, are devices mounted in
patient rooms. These devices include button modules used to call the nurse station, to signal
an emergency, or to register staff presence in the room.
Other modules, such as patient stations, bedside modules and beside extension modules,
include SafeConnect sockets for connecting handsets and pillow speakers so that patients can
call the nurses station from a bed or chair. Additionally, SafeConnect sockets can be used to
connect compatible medical devices, such as patient monitors, and more.
Room modules can be paired with Speech modules to sound alerts and for two-way voice
communication.
Module Buttons
Buttons on all modules operate similarly.
• Pressing a button once is a “short press.”
• Pressing and holding a button for at least 3 seconds is a “long press.”
Note: Pressing and holding a button for longer than 6 seconds without releasing the button
may reset the module. See “Reset Patient Room Stations” on page 44 for more details.
To Next Page
Loading...