Cleaning and Maintenance
Telligence
72PM000224A / 10 August 2022 / Ver. H
To clean a handset:
1. Carefully dip the handset and 1 inch of its cable in an approved cleaning solution for 10
seconds. Do not leave the handset submerged.
• Cidex
• Staphine
• 10% bleach/water solution
2. Remove the handset from the solution, and then use a soft, dry cloth to wipe away any
excess solution.
3. Inspect the handset to ensure that it is completely dry. Do not leave any droplets on the
handset or cord.
Cleaning Medical Device Cables
Clean call cord assemblies with a soft cloth that has been sprayed or dampened with an
approved disinfectant, such as Cidex, Staphine or a 10% bleach/water solution. Do not
submerge the cords.
To Next Page
Loading...