134 Avaya 374x DECT Telephones - User Guide 02/2016
To update manually:
1. Select Update > Firmware.
2. Click "Browse..." and browse to the firmware file.
3. Click "Upload"
4. Reset in order to make the changes take effect, see Reset
on page 141.
Update the Boot File
Updated software files are distributed by your supplier.
There are two ways to update the boot file:
l Using an update server, see Appendix A: How to Configure and Use the Update Server on
page 153.
l Manual update, see below.
To update manually:
1. Select Update > Boot.
2. Click "Browse..." and browse to the boot file.
3. Click "Upload".
4. Reset in order to make the changes take effect, see Reset
on page 141.
Update the RFPs
This section only applies to the IPBL.
Updated software files are distributed by your supplier.
There are two ways to update the RFPs:
l Using an update server, see Appendix A: How to Configure and Use the Update Server on
page 153.
l Manual update, see below.
To update manually:
In the RFP status list, information on connected RFPs are displayed.
1. Select Update > RFPs.
2. Click "Browse..." and browse to the RFP update file.
3. Click "Upload".
To Next Page
Loading...
