Avaya IPBS2 - To Modify an Additional Administrator Account; Managing User Administrators; Create a User Administrator

Configuration
Avaya 374x DECT Telephones - User Guide 02/2016
61
To modify an additional administrator account, do as follows:
1. Log in as system administrator (see Log in as System Administrator on page 59).
2. Select General > Kerberos Server
3. On an existing account row in the Users section:
l Enter a new user name
l Enter a new password
l Enter the password again
l Select Administrator (for System Administrator) or Auditor in the drop-down list (See
Access Levels
on page 57 for a description of access levels.)
4. Click "OK".
The account row is updated.
To delete an additional administrator account, do as follows:
5. Login as system administrator (see Log in as System Administrator
on page 59).
6. Select General > Kerberos Server
7. On the row to be deleted, select the Delete check box.
8. Click "OK".
The account row is deleted.
Managing User Administrators
Create a User Administrator
IPBS/IPBL is not supplied with preinstalled user administration accounts. Therefore, the first
user administration account must be created by a system administrator. If additional user
administration accounts are needed they must also be created by a system administrator.
1. Log in as System Administrator (see Log in as System Administrator
on page 59).
2. Select "Users".
3. Click "show" .
4. The User Administration page (see figure 20
on page 59 for a sample) is displayed.
5. Click "new".
6. Select the "User Administrator" radio box. The window layout transforms.
7. Enter a long name.
8. Enter a name (NOTE: This field is used for login).