Operation
Avaya 374x DECT Telephones - User Guide 02/2016
89
5. Click “OK”. The windows closes.
6. A key pair and a CSR file will be created. This may take up to one hour depending on the
key strength selected. During this time the device will be fully operational with the
exception of https not working and the certificate tab pane not being visible.
7. When the CSR file has been generated it is visible in the Signing Request section of the
Certificates page.
8. Download the CSR file by clicking the "PEM" or "DER" link in the Signing Request section.
9. Send the CSR file to your CA.
10. If successful your CA will send back a digitally signed certificate file. This file should now
be uploaded.
11. Select the certificate file.
12. Click "Upload".
Note: If the CSR file generated in step 5 is deleted before receiving the reply from the CA (in step 8) it
will not be possible to upload the signed certificate file in step 10. The system will automatically delete
the CSR file when step 10 has completed.
Provisioning
Provisioning makes it easy to manage IP-DECT users from the IP-PBX without using the
IP-DECT GUI. Provisioning is mainly configured in the IP-PBX but it must be enabled in the
IPBS/IPBL. If provisioning is enabled user records in the IPBS/IPBL cannot be modified since
all user data is mapped from the IP-PBX to the IPBS/IPBL.
Note: Local users created in the IPBS/IPBL will be deleted when provisioning is enabled if no
corresponding user exists in the IP-PBX.
To Next Page
Loading...
