68 Avaya 374x DECT Telephones - User Guide 02/2016
Add Users
This section describes how to add users to the IP-DECT system. The IPEI, which is the unique
identification number of the handset, can be registered in two ways:
l Anonymous Registration can be used in en existing IP-DECT system. Instead of the
administrator collects all the handset, the user of the handset does the registration. The
IPEI is automatically associated to the user, see Anonymous Registration
on page 68.
l Individual Registration can be used if a few new handsets shall be added to the IP-DECT
System. The IPEI is entered manually, see Individual Registration
on page 69.
Anonymous Registration
Anonymous Registration is done in two steps. First, the user is registered in the IP-DECT
System. Second, the handset is assigned to the user from the handset.
Add users in the IP-DECT System
1. Under Administration, select "Users".
2. Click "New".
3. Enter the following information in the corresponding text fields, leave the IPEI / IPDI text
field empty, do not remove the automatically generated Auth. Code:
4. Click "OK".
5. Repeat step 2 to 4 for all users.
Assign Handsets to Users
1. Select DECT > System.
Field name Description
Max.
characters
• Long Name The name of the user, need to be unique throughout the
system. This is the name presented in a called party´s
display, unless this is configured in the IP-PBX.
30
• Display Name Optional, will be shown in the handset display when the
handset is idle.
30
• Name Optional, the user name. 30
• Number Mandatory, the phone number extension, need to be
unique throughout the system.
30
• Password Optional, is used for registration towards the gatekeeper. 30
To Next Page
Loading...
