Operation
Avaya 374x DECT Telephones - User Guide 02/2016
91
8. Select General > Certificates.
9. In the Rejected certificates section select the check box of the certificate you want to trust.
10. Click "Trust".
For more information about certificate handling, see Public Key Certificates (Digital
Certificates) on page 31.
Provisioning Modes
There are three different modes.
LAN
This section describes how to do the following configurations and settings.
l Set DHCP mode
l Set IP static address
l Set dynamic IP address
l Set link type
l Configure VLAN
l View LAN statistics
l Deactivate LAN port (only for IPBL)
Note: The IPBL has two LAN ports. LAN1 port must be used in the IP-DECT system (LAN2 port is
for administration only). This is not applicable when RSTP is used, see Enable RSTP (only for
IPBL) on page 94.
Some of the above configurations and settings plus additional ones can be set by a DHCP
server via DHCP options. For more information about DHCP options, see Appendix
E: Configure DHCP Options on page 168.
Set DHCP Mode
The IPBS/IPBL can have different DHCP modes, see the table below.
Active The connection is up.
Inactive Provisioning is not enabled for the currently viewed IPO PBX or the
connection is used for the other IPO PBX.
Not connected Provisioning is enabled for the currently viewed IPO PBX but the
connection cannot be established or the connection is being established.
To Next Page
Loading...
