February 2016
Installation and Operation Manual
Avaya IP-DECT Base Station & IP-DECT Gateway version 7.2.x
160
9. In the IP-DECT device (IPBS/IPBL), enter the URL to the directory where the
command file is located
36 Select Services > HTTP Client.
37 In section Authenticated URLs, enter in the URL text field the URL to the directory.
38 In the User text field, enter the user name of the AD user that was given write access, see
6. Add an AD user and give the user write access to the directory on page 159.
39 In the Password text field, enter the password.
10. Test to upload configurations on the Web server
40 During the test period, set the poll interval to 1 minute.
41 When the command file has been run, check that the label data in the IPBS/IPBL (select
Services > Update) is the same as in the command file.
42 Check that the configuration file is located in the directory.
To Next Page
Loading...
