Configuration
Avaya 374x DECT Telephones - User Guide 02/2016
69
2. In the Subscriptions drop-down list, select "With System AC" to enable anonymous
registration. Click "OK".
3. Perform an "over air subscription" using the system Authentication Code. For information
on how this is done, see the reference guide of the handset.
The handset IPDI number appears in the Anonymous list.
4. To view the list: Select Users > Anonymous.
l Assign the handset to any user, subscribed or unsubscribed, on any Master defined in
the system by calling the desired Master id & extension & optional individual AC code
and hang up.
Example where 0 is the Master id, 200 is the extension and 1234 is the AC code:
*0*200*1234#. If 200 is occupied by another handset, the new handset will be
assigned this identity and the old handset will be moved to the anonymous list when
logging in the new handset.
NOTE: When using AC code, start with * and end with # character. Otherwise skip the
*# characters.
l Repeat step 3 - 4 for all handsets.
Note: For safety reasons, when the Anonymous Registration is finished change the Subscription
Method to "Disable"otherwise anyone with knowledge of the System AC could register to the
IP-DECT System. See below for more information.
5. Select DECT > System.
6. Disable anonymous registration by selecting "Disable" in the Subscription drop-down list.
Click "OK".
Individual Registration
1. Select DECT > System.
2. In the Subscriptions drop-down list, select "With System AC" or "With User AC". Click
"OK".
3. Tip: See also Set Subscription Method
on page 99 for more information.
4. Select "Users".
5. Click "New".
6. Enter the following information in the corresponding text fields:
Field name Description
Max.
characters
• Long Name Mandatory, the name of the user, need to be unique
throughout the system. This is the name presented in a
called party´s display, unless this is configured in the
IP-PBX.
30
To Next Page
Loading...
