Avaya IPBS2 - Add a Virtual Directory on the Web Server

February 2016
Installation and Operation Manual
Avaya IP-DECT Base Station & IP-DECT Gateway version 7.2.x
158
Figure 32. To configure Microsoft IIS as an Update Server.
1. Install server role and role services on the Web server
1 Connect to the Windows 2008 R2 server.
2 In Server Manager": Right-click on "Roles" and select "Add Roles" (menu item). The
"Add Roles" wizard starts.
3 Click "Next".
4 Select the server role Web Server (II) check box.
5 Click "Next".
6 Click "Next".
7 Make sure that the following role services check boxes are selected and leave the rest
unchecked:
- Directory Browsing
- WebDAV Publishing
- Digest Authentication
8 Click "Next".
9 Click "Install".
2. Add a virtual directory on the Web server
10 In "Internet Information Services (IIS) Manager": Right-click on "Default Web Site" and
select "Add Virtual Directory..." (menu item). The "Add Virtual Directory" window is
shown.
11 In the Alias text field, enter a name for the virtual directory.
12 In the Physical path: field, click on the "..." button to the right of the field and browse to
the location where the virtual directory shall be stored. Create a new virtual directory and
name it.
13 Close the "Add Virtual Directory" window, click "OK".
2. Add a virtu a l
directory on th e
Web server
4. Enable Digest
A u th e n tication
5. Enable Directory
Brow sing
6. Add an AD user
and give th e user
write access to
th e directory
3. Enable WebDAV
and set authoring
rules for WebDAV
8. In th e IP-D ECT
device, enter th e URL
to th e command file
7. Add a command
file to th e directory
referred by th e
virtu a l directory
9. In th e IP-D ECT
device, enter th e URL
to th e directory
where th e command
file is located
10. Test to upload
co n figurations on
th e Web server
1. Install server role
and role services
on th e Web server