Operation
Avaya 374x DECT Telephones - User Guide 02/2016
93
Dynamic IP address using DHCP
The Radios can have dynamic IP address allocation if the network has an DHCP server.
1. On the IPBS: Select LAN > DHCP.
On the IPBL: Select LAN1 > DHCP.
2. Select “Client” in the Mode drop-down list.
3. Click “OK”.
4. Reset in order to make the changes take effect, see Reset
on page 141.
Note: If the DHCP lease time is shorter than the time-to-live of the name/IP address association in the
Windows Internet Name Service (WINS) server, it may cause a mismatch, and a wrong device may be
reached if its WINS name is used.
Link
1. On the IPBS: Select LAN > Link.
2. On the IPBL: Select LAN1 > Link.
The link setting should be set to "auto" under all normal circumstances.
Configure VLAN
Identity and priority settings for VLAN are done in the "LAN > VLAN" sub menu.
Note: It is necessary to have a VLAN with the same ID as configured in the IPBS/IPBL, otherwise it
will not be possible to access the IPBS/IPBL.
Note: If "VLAN = 0", the Quality of Service (QoS) is inactive according to 802.1q.
It is also recommended to avoid "VLAN = 1" as it often is used as a default VLAN setting.
View LAN Statistics
To view statistics of LAN events:
1. On the IPBS: Select LAN > Statistics.
2. On the IPBL: Select LAN1 > Statistics.
To reset the ethernet statistics counters, click "Clear".
To Next Page
Loading...
