2. In the navigation pane, click Wi-Fi.
3. Configure the following areas:
• WiFi Control
• WiFi Setting
• IP Configuration
• WEP
• WPA2 Enterprise (802.1x)
• QoS
4. Click one of the following:
• Save: To save the configuration changes.
• Reset to Default: To revert to the default values.
Wi-Fi settings field descriptions
Name Description
WiFi Control
WLAN Network Configuration Mode Specifies the Wi-Fi network configuration mode.
The options are:
• Automatic (default)
• Manual
WiFi Setting
Country Specifies the country code to define the Wi-Fi radio parameters
permitted by the local regulatory domain.
Value format: two-character country code. The default value is
US.
Use of 802.11d Configures the 802.11d specifications automatically to the local
regulatory domain for the WLAN network.
The options are:
• Disable (default)
• Enable
WLAN Active SSID Displays active SSID when Wi-Fi is active. This is an internal
parameter.
Value format: a sting from 0 to 32 characters. The default value
is empty.
Table continues…
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 112
Comments on this document? infodev@avaya.com
To Next Page
Loading...
