Avaya J100 Series Installing And Administering

Chapter 10: SIP server redundancy
configuration
SIP server redundancy
In an Open SIP environment, you can configure Avaya J100 Series IP Phones to connect to one
of the following SIP servers in a redundant mode.
• Generic open SIP - redundant mode is not supported. However, by connecting to one of the
recommended Open SIP servers, you can configure the phone for redundant signaling mode.
• BroadSoft
• Netsapiens
When in redundant mode, the phone uses signaling service from a secondary server if the primary
server is down. The following sections explain how to administer a phone for a redundant
connection in different modes.
Related links
Redundancy in generic Open SIP on page 276
Redundancy in a Broadsoft environment on page 278
Redundancy in a Netsapiens environment on page 280
Redundancy in generic Open SIP
In a generic Open SIP environment, phone connects to the recommended Open SIP server.
Related links
SIP server redundancy on page 276
Redundancy parameters - generic Open SIP on page 276
Redundancy parameters - generic Open SIP
To configure the phone for redundant signaling mode in a generic Open SIP environment, use the
46xxsettings.txt file to set the following parameters:
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 276
Comments on this document? infodev@avaya.com

Avaya J100 Series Specifications

General

Category	IP Phone
Speakerphone	Yes
Connectivity	Ethernet
Power	Power over Ethernet (PoE)
Network Protocols	SIP
Display	Monochrome or Color (depending on model)