Avaya J100 Series - Follow Me

• Initiate call transfer
• Initiate call conference
• Change DND status
• Report phone status
Related links
Open SIP operation modes on page 40
3CX parameters
Use the 46xxsettings.txt file to set the following parameters:
Parameter Default
value
Description
3PCC_SERVER_MODE 0 Specifies the server mode.
Value operation:
• 0: Generic
• 1: BroadSoft
• 2: 3CX
ENABLE_DND 0 Specifies that the do-not-disturb feature is enabled.
Value operation:
• 0: Disabled
• 1: Enabled
You can enable the DND feature through the 3CX web
application.
Related links
Open SIP operation modes on page 40
3CX configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 47
Comments on this document? infodev@avaya.com