Avaya J100 Series Installing And Administering

Configuring secure mode parameter
You can configure the following parameter to enable secure mode.
Name Default value Description
ENABLE_GDPR_MODE 0 Specifies if data security and
privacy mode is applied on the
phone.
When this parameter is enabled,
the phone doesn’t store any
personal data without encryption
for a period of more than 24
hours.
Value operation:
• 0: Secure mode is disabled
(default)
• 1: Secure mode is enabled
Related links
Secure mode on page 272
Data privacy
In addition to activating the secure mode, you must use the following configuration to ensure user
data is private:
• Contacts: disable by setting the following 46xxsettings.txt parameter:
SET ENABLE_CONTACTS 0
• Recents: disable by setting the following 46xxsettings.txt parameter:
SET ENABLE_CALL_LOG 0
Note:
The phone deletes existing Recents logs when you apply this setting.
• Force HTTPS for configuration and disable Web Server: set the following
46xxsettings.txt parameters:
SET ENABLE_WEBSERVER 0
SET AUTH 1
• Logs: by default, logs are protected, because the SSH server is disabled by default. Logs are
internal to the phone and, with GDPR mode activated, are cleared every 24 hours. To
maintain these settings, do not set the SET SSH_ALLOWED parameter value to other than
0. To protect logs, use the following 46xxsettings.txt parameters:
Data privacy
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 273
Comments on this document? infodev@avaya.com

Avaya J100 Series Specifications

General

Category	IP Phone
Speakerphone	Yes
Connectivity	Ethernet
Power	Power over Ethernet (PoE)
Network Protocols	SIP
Display	Monochrome or Color (depending on model)