Distinctive Alert Waiting Tone
The Distinctive Alert Waiting Tone feature enhances the call waiting service by providing a
distinctive ringtone to the caller when the called party is busy. The called party is alerted with a call
waiting tone.
Distinctive Alert Waiting Tone includes the following features:
• Priority Alert Call Waiting Tone
• Alternate Number Call Waiting Tone
The Distinctive Alert Waiting Tone feature can be configured only on BroadSoft web interface.
For more information about configuring Distinctive Alert Waiting Tone on BroadSoft web interface,
refer to Distinctive Alert Waiting Tone Feature Description at
https://www.broadsoft.com/.
Dynamic Park and Page
With the Dynamic Park and Page feature, the user can park calls and announce the parked calls
to other users. You can configure the slot numbers for Park and page. When the user parks a call
in one of the park slots, the user or any other user who receives the page can dial that park slot
number to unpark the call.
Dynamic park and page configuration
Use the 46xxsettings.txt file to set the following parameters:
Avaya J129 IP Phone does not support these parameters.
Parameter name
Default value Description
CALL_PARK_DYNAMIC_METHO
D
0 Specifies the method the phone
will use to park an active call to a
dynamic parking slot assigned by
the server.
Value operation:
• 0: Blind Transfer: the active call
is blind transferred to the
CALL_PARK_DYNAMIC_FAC
(Default)
• 1: DTMF: provide the
CALL_PARK_DYNAMIC_FAC
digits into the active call
Table continues…
Feature configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 219
Comments on this document? infodev@avaya.com
To Next Page
Loading...
