• SSID: Specifies the network name for the WLAN you are using. Use the navigation key
to select another SSID.
• Wi-Fi networks: Displays available WLAN.
7. Use the navigation key to select a WLAN, and press Connect.
8. Press one of the following:
• Save
• Cancel
• Change
Configuring SIP settings
About this task
Use this procedure to set up SIP-related settings, such as identifying the SIP proxy server.
Before you begin
To use TLS signaling, ensure ENFORCE_SIPS_URI is set to 0.
Procedure
1. Press Main Menu > Admin.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select SIP.
5. Choose one of the following:
• SIP global settings
• SIP proxy server
6. Press Select or OK to change any of the following SIP global settings:
• SIP Domain: Changes the domain parameter of SIP.
• Avaya Environment: Specifies whether the available SIP Avaya environment is in
effect.
The two modes to detect the available environment are as follows:
- Auto: Detects the Avaya environment automatically.
- No: Does not detect the Avaya environment and switches to a non-Aura mode.
Note:
Disable the Avaya Environment configuration from the 46xxsettings.txt file.
• Registration policy: Specifies the registration policy for SIP.
Configuring the phone using Administration menu
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 87
Comments on this document? infodev@avaya.com
To Next Page
Loading...
