Avaya J100 Series - Modifying the Settings File

Parameter Retained
MSGNUM N
PROCSTAT Y
PROCPSWD Y
PHY1STAT Y
PHY2STAT Y
PHNCC N
PHNDPLENGTH N
PHNIC N
PHNLDLENGTH N
PHNLD N
PHNLAC Y
PHNOL N
RFSNAME N
SNMPADD Y
SNMPSTRING Y
SIG Y
SCREENSAVERON N
TEAM_BUTTON_RING_T YPE Y
TPSLIST N
VLANTEST Y
Modifying the Settings file
About this task
Use this procedure to modify the Settings file to provision the phone configuration parameters.
The parameter values stored for the users of a particular phone model do not apply to other phone
models, even if the corresponding SIP user is the same.
Note:
This procedure applies to Avaya Aura
®
environment only. In IP Office, the settings file is
autogenerated and cannot be modified.
Procedure
1. On the file server, go to the directory of the Settings file.
2. Open the Settings file in a text editor.
3. Set the values of the parameters that you want to provision.
4. Save the Settings file.
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 178
Comments on this document? infodev@avaya.com