Procedure
1. Log in to the web interface with your username and default password.
2. In the Current Password field, enter your current password.
3. In the New Password field, enter your new password
4. In the Confirm Password field, re-enter your new password.
5. Click Update.
Changing the phone web interface password
About this task
To change the password of the phone web interface anytime after the first login.
Before you begin
Ensure that your new password complies with the new rules.
Procedure
1. Log in to the web interface with your username and current password.
2. In the navigation pane, click Password.
3. In the Web Admin Password section, do the following:
a. In the Current Password field, enter your current password.
b. In the New Password field, enter your new password.
c. In the Confirm Password field, re-enter your new password.
d. Click Save.
Viewing the status of the phone configuration
About this task
In the web interface of the phone, the Status tab displays all the configurations of the phone. You
can see the latest values of the configurations on the status tab.
When you click on any configuration field, the screen displays the details of that field in the
Parameter Help section.
Procedure
1. Log in to the web interface.
2. In the navigation pane, click Status.
3. You can view any of the following configurations:
• System
Configuring the phone using the web interface
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 99
Comments on this document? infodev@avaya.com
To Next Page
Loading...
