Avaya J100 Series - Making a Call from the Directory

• Interfaces
• IP Mode
• IP Parameters (Ethernet)
• IP Parameters (Wifi)
• Plug-and-Play Configuration
• Configuration Server Address
• SIP Account
• Quality of Service
• 802.1x parameters
• VLAN
• SSL
• Web Server
4. To view the latest configuration values on the screen, click Refresh .
Status field description
Name Description
System
Model Specifies the model number of the phone.
Software Version Specifies the version number of the software in the
phone.
Backup Software Version Specifies the version number of the backup
software in the phone.
Protocol Specifies the protocol value set in the phone.
Group Specifies the group value set in the phone.
MAC Address Specifies the MAC address of the phone.
Serial Number Specifies the serial number of the phone.
Product ID Specifies the product ID of the phone.
Device Type Specifies the device type. Example: Avaya SIP or
Open SIP
Server Mode Specifies the server mode set in the phone.
Last settings update Specifies the date and the time when the settings or
the firmware were last updated.
Interfaces
Active Interface Specifies the active interface of the phone.
Ethernet Status Specifies the ethernet status of the phone.
PC Ethernet Status Specifies the PC ethernet status of the phone.
Table continues…
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 100
Comments on this document? infodev@avaya.com