d. Click Save.
Debugging
About this task
When you click on any configuration field, the screen displays the details of that field in the
Parameter Help section.
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Debugging.
3. Configure the fields in the following areas:
• Log
• SNMP
• RTCP Monitoring
• Phone Report
• SSH
• SLA Monitor
• Other
4. Click one of the following:
• Save: To save the configuration changes.
• Reset to Default: To revert to the default values.
Debugging field descriptions
Name
Description
Log
Logging Specifies the logging status.
The options are:
• Off (default)
• On
Syslog Server Specifies the IP or the DNS address of the Syslog server.
The valid value is a string of up to 255 ASCII characters. The default
value is empty.
Table continues…
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 156
Comments on this document? infodev@avaya.com
To Next Page
Loading...
