Procedure
1. On the phone, press Main Menu.
2. Scroll to Administration, and press Select.
3. In the Access code field, enter the administration password.
The default access code is 27238.
4. Press Enter.
5. Scroll to IP Configuration, and press Select.
6. Scroll to Ethernet IPv4, and press Select.
7. Scroll to Phone.
The IP address is displayed next to the Phone.
Logging in to the phone web interface
About this task
You can log-in to the phone web interface to do the following:
• Configure or edit the configuration of the phone.
• View the phone configuration.
Note:
When you log-in for the first time, you must change the default password and re-login with the
new password.
Procedure
1. In your browser, enter the IP address of the phone and press Enter.
The login page displays.
2. Enter the following:
• In the Username field: The user name is always admin.
• In the Password field: The default password is 27238 for the first time log in, for
subsequent login enter the password you set.
3. Click Login.
For first time login, the phone web interface prompts you to change your default password.
For subsequent login, you are logged into the phone web interface.
Configuring the phone using the web interface
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 97
Comments on this document? infodev@avaya.com
To Next Page
Loading...
