4. Do one of the following:
• To access the user login screen, press the Login soft key.
• To access the Admin menu, press the Admin soft key and enter the admin menu
password.
Cloud configuration
Configuration through a cloud server
Cloud server configuration simplifies the process of deployment and is applicable when the phone
must be configured on an Open SIP server. The cloud vendor assigns a customer reference
number and creates a subdirectory on its file server. The cloud vendor must generate the following
for creating a customer profile:
• Customer username
• Customer password
• Customer extension number
The cloud vendor must have a staging area file server to host the customer-specific settings.
Customer-specific settings are generated for each customer through the MAC address of the
phone. A text file containing the MAC address of the phone must be hosted on the staging area
file server.
The staging area file server must host the following files:
•
J100Supgrade.txt
•
46xxsettings.txt
•
MACADDR.txt
• Software upgrade files available from Avaya
Phone setup process on a cloud server
The phone does the following during the setup process:
1. Boots and discovers the staging area file server address through DHCP.
2. Retrieves and checks the J100Supgrade.txt file for device upgrade if required.
3. Retrieves the 46xxsettings.txt and MACADDR.txt files for customer-specific
configurations.
4. Logs on to the SIP Proxy server of the cloud service provider.
Initial setup and connectivity
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 38
Comments on this document? infodev@avaya.com
To Next Page
Loading...
