Avaya J100 Series - Configuring Network Settings

Name Description
Supplicant Specifies whether the 802.1x Supplicant is enabled
or disabled.
Pass-through Specifies whether the 802.1x pass-through is
enabled or disabled.
VLAN
VLAN ID Specifies the VLAN ID of the phone.
SSL
Open SSL Version Specifies the version of Open SSL used by the
phone.
Open SSH Version Specifies the version of open SSH used by the
phone.
Web Server
Web On HTTP Specifies whether Webserver is allowed on the
HTTP server.
HTTP Port Specifies the port on which Webserver can be
accessed on HTTP.
HTTPS Port Specifies the port on which Webserver can be
accessed on HTTPS.
Configuring network settings
About this task
When you click on any configuration field, the screen displays the details of that field in the
Parameter Help section.
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Network.
3. Configure the following areas:
• Network
• DNS
• ICMP
• TCP
• TLS
• Web Server
• STUN
• NAT
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 102
Comments on this document? infodev@avaya.com