Name Description
Phone behavior on Pending
request
Specifies the functioning of the device when performing certificate
enrolment.
The options are:
• Poll SCEP server periodically in background
• Wait until a certificate is received or rejected (default)
SCEP Password Specifies a challenge password to use with SCEP.
The valid value is a string of up to 255 ASCII characters without
any intervening spaces. The default value is “$SERIALNO”.
PKCS12
PKCS12 Address Specifies the IPv4 or IPv6 URL address, or FQDN from where a
PKCS#12 file is to be downloaded.
The valid value is a string of up to 255 ASCII characters without
any intervening spaces. The default value is empty.
PKCS12 Password Retry Count Specifies the number of attempts allowed for password entry.
The valid value is an integer from 0 to 100. The default value is 3
attempts.
Available Identity Certificate Specifies the trust certificates used as trust points for TLS
connections.
Upload Identity Certificate Displays available trust certificates for the phone.
You can also browse and upload the certificates from the local PC
by clicking Browse > Import.
Web Server
Available Webserver Certificate Specifies the trust certificates used as trust points for TLS
connections.
The valid value must be in .pem or .p12 formats.
Upload Custom Webserver
Certificate
Specifies the custom certificates to be uploaded.
You can also browse and upload the certificates from the local
machine by clicking Browse > Import
Password for Custom Webserver
Certificate
Specifies the password to decrypt the uploaded certificate.
Configuring Environment Settings
About this task
When you click on any configuration field, the screen displays the details of that field in the
Parameter Help section.
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 164
Comments on this document? infodev@avaya.com
To Next Page
Loading...
