Avaya J100 Series Installing And Administering

Name Description
SIP Signaling Port (range) Specifies the port range to be used for SIP signaling.
The valid value is an integer from 32 to 64,511.
The default value is 60473.
Miscellaneous
Conference Factory URI Specifies the URI for network conferencing in Open SIP environments.
The valid value is a string of up to 255 ASCII characters.
Voice Mail Access Code Specifies the number to access the voice mail in a non-Avaya environment.
100rel Specifies whether the 100rel option tag is included in the SIP INVITE
header field.
The options are:
• Disable: The tag is not included.
• Enable (default): The tag is included.
Validate Incoming
messages
Specifies whether AOR received in Request-URI of an incoming call must
be validated with the contact header published by phone during
registration.
The options are:
• Disable (default)
• Enable
‘Privacy’ header in
Incoming message
Specifies whether AOR received in Request-URI of an incoming call must
be private in the contact header published by the phone during registration.
The options are:
• Display CallerID information (default)
• Display ‘Restricted’
Configuring Settings
About this task
In the web interface of the phone, the Settings tab has various sections of the phone settings. You
can configure the required settings for your phone.
When you click on any configuration field, the screen displays the details of that field in the
Parameter Help section.
Procedure
1. Log in to the web interface.
2. In the navigation pane, click Settings.
Configuring the phone using the web interface
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 125
Comments on this document? infodev@avaya.com

Avaya J100 Series Specifications

General

Category	IP Phone
Speakerphone	Yes
Connectivity	Ethernet
Power	Power over Ethernet (PoE)
Network Protocols	SIP
Display	Monochrome or Color (depending on model)