Avaya J100 Series - Broadsoft Xsi Support

To enable the phone to auto-answer the incoming call, ensure to enable the
AUTO_ANSWER_DURING_CALL parameter, and disable the AUTO_ANSWER_MUTE_ENABLE
parameter.
For more information on configuring the soft client, see https://supportcenter.broadsoft.com/
Limitations
For using the soft client for the remote call initiation, ensure that you do not activate the local Call
Forward always and DND features.
BroadSoft Xsi support
The BroadSoft Xtended Service Interface (Xsi) provides a set of APIs that enables telephony
applications to integrate with BroadSoft servers to perform telephony-related functions in a
BroadSoft communication network. Avaya J100 Series IP Phones deployed in a BroadSoft
communication environment support BroadSoft Xsi.
Avaya J100 Series IP Phones use the Xsi interface to support the following Broadworks features:
• Directory
• Simultaneous Ring Personal
• Call Park/Unpark
• Call Forward Always
• Call Forward Busy
• Call Forward No Answer
• Do Not Disturb
• Call Waiting
• Anywhere
• Mobility
Note:
If you configure BroadSoft Xsi, the following local features will not be available for the users.
The administrator must enable these features on the BroadSoft server.
• Do Not Disturb
• Call Forward
BroadSoft Xtended Service Interface (Xsi) configuration
Use 46xxsettings.txt file to set the following parameters:
Feature configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 197
Comments on this document? infodev@avaya.com