Avaya J100 Series Installing And Administering

Parameter name Default value Description
WMLPROXY Null Specifies the address of an HTTP
proxy server that will be used by
the WML browser.
The allowed values must be in
the dotted-decimal (IPv4) or DNS
name format, separated by
commas without any intervening
spaces. The value can contain up
to 255 characters.
WMLEXCEPT Null Specifies the IP addresses or
domains for which the HTTP
proxy server set as the
WMLPROXY value will not be
used.
Allowed values can contain up to
255 characters and must be
separated by commas without
any intervening spaces.
Voicemail
The Voicemail feature is used to dial the configured voice mail number to receive a voice
message.
Configuring Voicemail by using the web interface
About this task
To configure the Voicemail list using the web interface, do the following steps:
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click SIP.
3. In the Miscellaneous area, specify the number to access the voice mail in a non-Avaya
environment.
4. Click one of the following:
• Save
• Reset to Default
• Help
Voicemail configuration
Use the 46xxsettings.txt file to set the following parameters:
Feature and application configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 256
Comments on this document? infodev@avaya.com

Avaya J100 Series Specifications

General

Category	IP Phone
Speakerphone	Yes
Connectivity	Ethernet
Power	Power over Ethernet (PoE)
Network Protocols	SIP
Display	Monochrome or Color (depending on model)