Avaya J100 Series - Chapter 3: Initial Setup and Connectivity; Initial Setup Checklist

Chapter 3: Initial setup and connectivity
Initial setup checklist
No. Task Reference
1 Examine the contents of the shipping
package to make sure all the relevant
components are available.
Avaya J100 Series IP Phones ship in a
box containing the IP Phone, handset with
a cord, dual-position phone stand, and
regulatory/safety sheet.
Note:
An Ethernet cable is not included in the
package and must be sourced separately.
Avaya J100 Series IP Phone Overview and
Specifications
2 Read and understand the regulatory/safety
sheet provided with the shipping.
Download all the relevant documentation
for the phone from the Avaya support
website.
https://support.avaya.com/documents/
3 (Optional) Install the wireless module on
the phone.
Note:
The wireless module is supported
only by Avaya J129 IP Phone, Avaya
J159 IP Phone and Avaya J179 IP
Phone.
Installing the wireless module on page 23
4 Connect a handset, and insert the phone
stand into the slots at the back panel of the
phone.
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 22
Comments on this document? infodev@avaya.com