Avaya J100 Series - Speaker Volume; Automatic Gain Control; Default Handsfree Audio Path

Name Description
Syslog Level Specifies the severity level of the syslog messages. Events with the
selected severity level and above are logged.
The options are:
• Emergencies (default)
• Alerts
• Critical
• Errors
• Warnings
• Notices
• Information
• Debug
Log Categories Specifies the list of log categories.
Select the appropriate log category. For example, select category
Audio for generating audio logs.
The default value is empty.
Enhanced Debugging Specifies the status of enhanced debugging.
The options are:
• Enable
• Disable (default)
SNMP
SNMP String Specifies the SNMP community name string.
The valid value is a string of up to 32 ASCII characters. The default
value is empty.
SNMP Address Specifies the IP addresses for SNMP queries.
The valid value is a string of up to 255 ASCII characters without any
intervening spaces.
The default value is empty.
RTCP Monitoring
RTCP Monitor Address Specifies the IP or DNS address of the RTCP monitor.
The valid value is a string of up to 255 ASCII characters. The default
value is empty.
RTCP Monitor Port Specifies the RTCP monitor port number.
Valid value is an integer from 0 to 65535. The default value is 5005.
Table continues…
Configuring the phone using the web interface
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 157
Comments on this document? infodev@avaya.com