Name Description
RTCP Monitoring Report
Period
Specifies the time interval in seconds for sending out RTCP monitoring
reports.
Valid value is an integer from 5 to 30. The default value is 5 seconds.
RTCP Publish Address Specifies the SIP URI target. Phone sends VQ-RTCPXR service quality
metric reports using this address in SIP PUBLISH message to the
central report collector. This parameter works independent of RTCP
Monitoring settings. This address should not have sip scheme.
The domain of the URI can be an IP address or a FQDN. The value
ranges from 0 to 255 characters; the default value is null. A valid
example: user@domain.com, an invalid example:
sip:user@domain.com
This parameter is applicable only in the RingCentral environment.
Phone Report
Phone Report Server Address Specifies the file server address to send the phone report. Click on
Generate Phone Report.
The valid value is a string of up to 255 ASCII characters.
Note:
The phone report also provides details such as product ID, default
server type, and DES support information.
SSH
SSH Allowed Specifies whether Secure Shell (SSH) is supported.
The options are:
• Enable
• Disable (default)
• Configured using local craft procedure
SSH Idle Timeout Specifies the time in minutes after which SSH is disabled.
The valid value is an integer from 1 to 32767. The default value is 10
minutes.
SSH Banner File Specifies the file name or the URL for a custom SSH banner file.
The valid value is a string of up to 255 ASCII characters. The default
value is empty.
Table continues…
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 158
Comments on this document? infodev@avaya.com
To Next Page
Loading...
