Avaya J100 Series - Page 220

Parameter name Default value Description
CALL_PARK_DYNAMIC_FAC Null Specifies the Feature Access
Code that the phone will use to
park an active call to a dynamic
parking slot assigned by the
server.
CALL_PAGE_EXTENSION_FAC Null Specifies the Page feature
access code that is used to
inform the server to perform a
page to an extension.
ENABLE_PARK_DYNAMIC_AND
_PAGE
0 Specifies whether the Park and
Page feature is available to the
user. The Park Dynamic and
Page feature requires that the
CALL_PARK_DYNAMIC_FAC
code and
CALL_PARK_DYNAMIC_METHO
D are defined in order to park the
call
Value operation:
• 0: Park Dynamic and Page
feature is not available to the
user(Default)
• 1: Park Dynamic and Page
feature is available to the user.
CALL_PAGE_GROUP_FAC Null Specifies the Page feature
access code that is used to
inform the server to perform a
page to an extension.
Table continues…
Feature and application configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 220
Comments on this document? infodev@avaya.com