Avaya J100 Series - Logging In on Another User’s Phone

Name Description
Enable PPM as source of
Proxy Server
Specifies whether PPM is used as a source of SIP proxy server
information.
Note:
This is an Avaya Aura
®
setting which is ignored in an Open SIP
environment.
The options are:
• Yes (default)
• No
Proxy Policy Specifies whether SIP proxy servers are read-only or can be edited.
The options are:
• Manual (Use Phone Admin Menu or WEB to configure): To configure
SIP proxy server manually by using the phone or the web interface.
• Automatic (Can be set from DHCP, LLDP, Settings File, PPM)
(default): To use the SIP proxy server settings received from the
46xxsettings.txt file .
SIP Proxy Server Specifies the SIP proxy server domain.
The valid value is a string of 0 to 255 ASCII characters, for example:
148.147.158.185:5061;transport=tls,alphagreensm01.avaya
.com:5061;transport=tls
Note:
To use TLS signaling, set the ENFORCE_SIPS_URI parameter to 0.
SIP Proxy Server
(Automatic)
Specifies the SIP proxy server settings as received from the
46xxsettings.txt file .
Register to Proxy Server Specifies whether the phone registers simultaneously to a proxy server.
The options are:
• Simultaneous (default)
• Alternate
Number of Line
Appearances
Specifies the number of line appearances that the phone will display. For
each displayed line appearance there is a specific line appearance index.
The options range from 1 to 10 line appearances. The default value is 3 .
Number of proxy server to
register simultaneously
Specifies the number of SIP proxy controllers that the phone can register
simultaneously.
The options are:
• 1
• 2
• 3 (default)
Table continues…
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 120
Comments on this document? infodev@avaya.com