Name Description
Call Pickup Barge In Specifies that when a BLF key is on a active call, the phone will
provide the user a context sensitive Barge In soft key, if the Call
Pickup Barge In FAC is defined. Call Pickup Barge In FAC can
be used with Busy Lamp Field (BLF) feature keys.
The default value is 33.
Call Park Specifies that a Call Park FAC can be used to park a call. If Call
Park FAC is defined this FAC will be prepended to the dialstring
when executing a Shortcut Action
The default value is Null.
Call Park Dynamic Specifies that a Call Park Dynamic FAC can be used to park a
user's call where the server will dynamically assign the park
location. Typically the user will then hear an announcement by
the server where the call is parked
The default value is Null.
Call Page Extension Specifies that a Call Page Extension FAC is used to inform the
server to perform a page to an extension
The default value is Null.
Call Page Group Specifies that a Call Page Group FAC specifies the feature
access code that phone will prepend to a user selected Paging
Group call. If the Call Page Group FAC is not defined then a
user selected Paging Group address will be dialed directly
The default value is Null.
Call UnPark Specifies that a Call UnPark FAC can be used to retrieve a
parked call. If Call Unpark FAC is defined this FAC will be
prepended to dial string when pressing a busy BLF Park key.
The default value is 88x.
Escalate Specifies that an Escalate FAC can be used by the phone to
invoke Broadworks call center Escalate feature. The value
specified by you is ignored if the phone receives another value
from XSI.
The default value is Null.
Phone Menu Options
Settings Specifies whether the Settings menu is displayed on the phone.
The options are:
• Do Not Allow
• Allow (default)
Table continues…
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 134
Comments on this document? infodev@avaya.com
To Next Page
Loading...
