Name Description
Contact Name display logic Specifies how to match a dialed string on an incoming call with
the users contacts.
The options are:
• Match the number completely (default)
• Match shorter number completely to the rightmost digits
of longer number
• Match at least 4 rightmost digits
LDAP contacts
Enable LDAP Search Specifies whether the LDAP Directory feature is enabled on the
phone. If LDAP Directory is enabled, users can select it as a
contact search source. When LDAP is enabled, other contact
search sources become disabled.
The options are:
• Enable
• Disable (default)
The LDAP contacts feature is not available in CCMS mode.
User Name Specifies an LDAP client user name. The default value is
empty.
User Password Specifies an LDAP client password. The default value is empty.
Server Address Specifies the IP address or a fully qualified domain name
(FQDN) of the LDAP directory server. The valid value is an IPv4
or IPv6 address in the dotted decimal format or a FQDN.
Server Port Specifies the port number for the LDAP directory server. Valid
values are positive integers from 1 to 65535. The default value
is 389.
Search Base Specifies LDAP search base parameters. Valid value is a string
of parameter settings, separated by commas. For example,
dc=global,dc=avaya,dc=com. The default value is empty.
Protocol Specifies whether to use TLS or TCP protocol for LDAP.
The options are:
• Use TLS (default)
• Use TCP
Authentication Specifies the kind of authentication that is used if the value of
the DIRUSERNAME parameter is not null.
Value operation:
• 0: Simple LDAP authentication.
• 1: Simple LDAP Authentication and Security Layer (SASL).
Table continues…
Configuring the phone using the web interface
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 137
Comments on this document? infodev@avaya.com
To Next Page
Loading...
