Name Description
Handset Profiles Specifies an ordered list of names to be displayed for handset
audio profile selection.
The list contains audio profiles set in the web interface, the
46xxsettings.txt file and internally, for example:
Default,Normal,Amplified,Hearing Aid.
The default value is empty.
Handset Profile Default Specifies the number of the default handset audio profile.
The options are from 1 to 20. The default value is 1.
Default Acoustic Exposure
Protection Mode
Specifies the acoustic exposure protection mode.
The options are:
• Off (Default)
• Dynamic
• 4 hours
• 8 hours
Dialing
Dial Plan Specifies the dial plan used in the phone.
Value format: a sting of 0 to 1023 characters without any
intervening spaces.
The default value is empty.
No Digit Dial Timer Specifies the time in seconds during which the phone waits for
a digit to be dialed after going off-hook and before generating a
warning tone.
The valid value is an integer from 0 to 60. The default value is
20 seconds.
Inter-digit Wait Timer Specifies the time in seconds during which phone waits after a
digit is dialed before sending a SIP INVITE.
The valid value is an integer from 0 to 10. The default value is 5
seconds.
Dial Local Area Code Specifies whether the user must dial the area code of calls
within the same area code regions.
The options are:
• No (default)
• Yes
Local Area Code Indicates the phone local area code which allows the user to
dial local numbers with more flexibility.
The valid value is a sting of 5 digits ranged from 0 to 9. The
default value is empty.
Table continues…
Configuring the phone using the web interface
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 143
Comments on this document? infodev@avaya.com
To Next Page
Loading...
