Name Description
Enable Local Dialing Rules Specifies whether the algorithm defined by parameters in this
section is used during certain dialing procedures.
The options are:
• Disable
• Enable without Contacts (default)
• Enable with Contacts
Country Code Specifies the country code of the phone.
The valid value is an integer from 1 to 999. The default value is
1.
International Access Code Specifies the international access code.
The valid value is up to 4 dialable characters. The default value
is 011.
Value format: digits from 0 to 9, *, #.
Long Distance Access Code Specifies the long distance access code.
The valid value range is a sting of integers from 0 to 9, and
empty. The default value is 1.
Internal Extension Number Length Specifies the length of an internal extension number.
The valid value is an integer from 3 to 13. The default value is
5.
National Telephone Number Length Specifies the length of a national phone number.
The valid value is an integer from 5 to 15. The default value is
10.
Outside Line Access Code Specifies the number for making an outside call, i.e. a local call
in a public network.
The valid value is up to 2 dialable characters. The default value
is 9.
Value format: digits from 0 to 9, *, #.
Remove PSTN access prefix from
outgoing number
Allows dialing digits during failover and removing of the PSTN
access prefix from the outgoing number.
The options are:
• No (default)
• Yes
Admin
Table continues…
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 146
Comments on this document? infodev@avaya.com
To Next Page
Loading...
