• the web interface of the Administration menu on the phone (available in the Broadworks and
other Open SIP environments).
• Broadworks web portal (available only in the Broadworks environment). For more details, see
the Broadworks configuration guide.
• Broadsoft Xtended Service Interface (available only in the Broadworks environment).
BLF Alerting
You can configure the way the phone alerts users about BLF incoming and BLF parked calls. The
available alert options are: None, Audial, Visual and Both. You can allow users to choose their
preferred alert option, if you use non-forced configuration values, or force-configure one of the
options.
If you select a non-forced configuration option, it becomes a default variant, still allowing the user
to select their own option. Setting a forced option overrides user selection.
You can configure this feature through Web user interface under Settings menu in Alerting on
calls and Incoming call indication.
In the 46xxsettings.txt file, you can configure the following parameters for this feature:
BLF_INCOMING_CALL_INDICATION, BLF_PARKED_CALL_INDICATION,
BLF_INCOMING_CALL_INDICATION_MODE, BLF_PARKED_CALL_INDICATION_MODE.
Note:
This feature is available in 3PCC environment for Avaya J159 IP Phoneand Avaya J169/J179
IP Phone.
Prioritizing an incoming call over a BLF call
About this task
You can configure the phone to select a higher priority for users’ own incoming calls over BLF calls
and parked BLF calls.
Note:
This feature is available for in 3PCC environment for Avaya J159 IP Phoneand Avaya J169/
J179 IP Phone.
Procedure
To configure this feature, do one of the following:
• In the 46xxsettings.txt file, set the PRIORITIZE_OWN_INCOMING_CALL to 1 to enable
the feature and to 2 to disable it.
• In the web User Interface, in Settings, select Enabled or Disabled in Prioritize own incoming
call.
Enabling this feature establishes the following call priority in which the phone displays calls:
• Own incoming calls (older calls first)
• Own parked calls (older calls first)
• BLF calls (older calls first)
Feature and application configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 200
Comments on this document? infodev@avaya.com
To Next Page
Loading...
