Parameter name Default value Description
DIRAUTHTYPE 1 Specifies the kind of
authentication that is used if the
value of the DIRUSERNAME
parameter is not null.
Value operation:
• 0: Simple LDAP authentication.
Normally the DIRUSERNAME
parameter must contain a DN
name of an LDAP record, and
DIRUSERNAME must contain a
password associated with the
record.
• 1: Simple LDAP Authentication
and Security Layer (SASL).
If a connection is established
over TLS (DIRSECURE is set
to 1 or 2), DIGEST-MD5 or
PLAIN authentication
mechanisms are supported.
If the connection established
over TCP (DIRSECURE is set
to 0) DIGEST-MD5 is the only
supported mechanism.
DIRSEARCH_FIELDS
"cn,sn,telephoneNumber" Specifies LDAP search attributes.
The exact number and names of
the search attributes depend on
the LDAP server configuration
and can vary from one LDAP
directory to another.
When configuring the
DIRSEARCH_FIELDS parameter,
you must use attribute names that
coincide with the selected LDAP
server attribute names.
For example,
SET DIRSEARCH_FIELDS
"givenName,mail,middle
initials,
telephoneNumber,sn,mobile ,
o ,department ,Rank ,office
,DoD SIP URI"
Table continues…
Feature and application configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 230
Comments on this document? infodev@avaya.com
To Next Page
Loading...
